How To Build a DIY Camera StabilizerSteadicam

Design inspired by Tiffen Steadicam Merlin StudioAmarelo and WSCLATER COMPLETE PARTS LIST actual parts used in this stabilizer MAIN BODY PARTS 1x LehighCrawford HGSH Jumbo Arm 1x 34 male conduit PVC adapter 1x 34 conduit PVC 45 degree elbow 2x Halex 121 ground clamp 2x 4 long 1420 round head machine screws attach to lower clamp for holding weights 2x 1.5 long 1420 round or flat head machine screw one attaches to front clamp for holding weights one for top rear bracket base 6x Bifold door pivot bracket N6543 by Primeline 6x 6 long 1420 hex bolts 5 unthreaded 1 fully threaded 8x 14 cut washer 4x 38 cut washer at least 9x 14 fender washer 1.25 dia.
need more if using as counterweights 1x 1.5 long 1420 round head machine screw for front lower bracket 2x 2 long 1420 flat head machine screw for clamping top Tplate to bottom Tplate 3x 0.75 long 1420 round head machine screw 2 for attaching rear brackets to Tplate 1 for front of camera sled 1x 0.75 long 1420 flat head machine screw for attaching quick release base to camera sled 4x Everbilt 3x3 Tplate comes in packs of 2 so 2 packs is enough 2x 0.5 long 1420 flat head machine screw for leftright of camera sled 4x 1420 wing nut 1 bag 14 nut bag contains 25 pieces rest should come with the 14 screws should need 27 total 1x Quick release plate needs a hole in the center that can receive a 14 dia.
flat head machine screw nonthreaded hole is ok GIMBAL PARTS 1 bag Traxxas TRA5151 Front and Rear Half Shaft 1 bag comes with 2 male and 2 female pieces 2x Skateboard bearings 8x22x7mm only need to 2 but may be cheaper to order pack of 8 than 2 individual 2x 34 CPVC coupler no threads 1x 34 CPVC straight pipe 5.5 long but probably have to pay for 10 feet 1x 1 long 716 bolt 1x 716 nut 2x 12 fender washer 1x Bike handle COUNTERWEIGHTS 1x Box of 100 38 fender washers 5x 14 washers cut or fender to hold 38 washers on 14 screws TOOLS 1x PVC pipe cutter 1x Screwdriver 2x Wrench or ratchet with 716 socket need 2 wrenches 1x Dremel file or sandpaper 1x Epoxy Putty 1x PVC Primer and Cement 1x Scotch Tape 1x Scissors

Источник: rutube.ru