FANUC PC WRITEPMC WRITE TEST DOWNLOAD EPROM MODE

A13B-0126-B002 FANUC PMC WRITER Protocol 1.
Set Eprom Type 2.
Set Start Address.
if not manual set value will set 0x000000 3.
Set Stop Address if not manual set value will set end of address 2716 0x0007FF 2732 0x000FFF 2532 0x000FFF 2764 0x001FFF 27128 0x003FFF 27256 0x007FFF 4.
Download Mode 5.
Start Download The Machine read 2 method check first if read data most that 2.5V is Logic 1 second if read data less that 0.5V is Logic 1.
First Value must equal to NOT Second Value DATA1 DATA2 XOR 0xFF.
in range 0.51V to 2.49 is error corrupt data eprom not install.
Alarm 20.3 and 21.0 Fault 08 01 00 Datasheet

Источник: rutube.ru